With school letting out for the summer and families taking vacations,
we want everyone to have safe travels! Before traveling you should always have
your car checked out and tires looked at. Hopefully you don’t experience any
troubles while driving, but just in case we want you to be informed on how to
change a flat tire as quick and easy as possible.
Changing a Flat Tire:
·
Find
a safe spot to pull over.
If you're on the freeway, getting off is the safest bet, even if you have to
drive on a blown tire. Otherwise, pull as far onto the shoulder as possible.
Don't park in the middle of a curve, where approaching cars can't see you. Also
choose a flat spot; jacking up your car on a hill can be a disaster. If you
have a manual transmission, leave your car in gear. Be sure to set your parking
brake!
·
Turn
on your hazard lights.
Get the jack, wrench, and spare tire from the trunk of the car and bring them
over to the tire that is flat. Use other tools or supplies if needed.
·
Use
the wrench to loosen the lug nuts. You may need to remove the hubcap. Don't remove
the lug nuts at this point; simply loosen them by turning the wrench to the
left (counter-clockwise). If the lug nuts are really tight, try placing the
wrench on the nut and standing on the wrench arm to use your full weight on it.
You can also try hitting the wrench arm with a rock.
·
Use
the jack to lift the vehicle off the ground. Different car models may have different
places to put the jack; consult your owner's manual for specific locations.
Once the jack is securely in the correct spot, jack up the car until the tire
is about six inches off the ground.
·
Remove
the lug nuts and pull the tire off the car. Make sure to place the lug nuts in a pile
that won't get scattered, and pull the tire straight toward yourself to remove
it from the wheel base.
·
Place
the spare on the car.
Line up the lug nut posts with the holes in the spare, and push the spare all
the way onto the wheel base until it can't go any farther.
·
Put
on the lug nuts.
Don't put them on tightly, just make sure they're on enough for the spare to
stay on the car for a moment.
·
Lower
the car back to the ground.
Use the jack to bring the car back down to ground level. Remove the jack from
underneath the car.
·
Make
sure the lug nuts are tightened. With the car back on the ground, you can now
tighten the lug nuts. Rather than tightening them one by one in order, start
with one lug nut, tighten it about 50%, move to the opposite nut (across the
circle) and tighten that one about the same amount. Keep tightening opposite
lug nuts gradually in turn until each lug nut is as tight as it can be.
·
Put
your flat tire and tools back in your trunk. Make sure you don't leave anything on the
side of the road.
We want to make
sure everyone has a great summer and that their travels are easy and safe! Remember we wanna see ya in a KIA!
http://www.dmv.org/how-to-guides/changing-tire.php
